Belpasso
A virtually impenetrable surface is one of the remarkable features of Belpasso. This non-slip, EasyClean surface is ideal for any application from patio to streetscape. The TitanTec™ surface of Belpasso repels any staining substance or chemical. Not even sulfuric acid will affect the surface!
Base Requirement & Bedding Course – standard paver base specification or on open graded material for raised patios, terraces or concrete overlays.
Handling and Installation– A protective pad is required when doing the final paver compaction. Care must be taken to avoid tossing stones so that they bang against each other. Damage to the surface appearance can happen if handled too rough. Running Bond or Herringbone is recommended. Install from multiple palettes for best color distribution. Gloves recommended.
Jointing Material and Joint Stabilization
- Good: Ordinary dry joint sand
- Better: Most polymeric sands can be used (proper cleaning is essential prior to and during activation)
- Best: ordinary dry joint sand stabilized by a water-based joint sand stabilizer sealer. (Joints should be flooded but the paver surface must be squeegeed and/or blown clean).
Sealers
- Not required
- A light sealer wipe may mask any tamper scuffs
Cleaners – Product made with TitanTec™ and EasyClean™ Surface Technologies. Clean up with detergent and water if necessary.
Special note – To avoid issues with height variance, do not use as a direct overlay on concrete.